Electric Handpiece Repairs
Having the correct number of handpieces in your office is very important
- Manufacturers require 3 handpieces per operatory to optimize turbine life
- This typically allows for 1 handpiece ready for use by the doctor
- 1 handpiece in the sterilizer
- 1 handpiece cooling to room temperature
The largest enemy of electric handpiece life is Heat.
- By following these easy lubricating steps, Heat generation will be minimized, both increasing handpiece life and patient safety.
- Lubricate ALL Electric Attachments with The Dentist’s Choice Full-Synthetic Handpiece Lubricant & Cleaner
- A synthetic lube is necessary for Electric Attachments due to their high speed and high number of internal moving parts.
- To lubricate, affix the Attachment nozzle to your can of Full-Synthetic Lubricant & Cleaner
- Insert the nozzle firmly into the back of the Attachment and spray for a 2 second burst.
- While holding upside down, insert the Attachment onto a motor unit and run for 10 seconds.
- Sterilize the Attachment